Poreg2P Data Logger

The Poreg2P  is designed for acquisition, storing, processing and displaying of data acquired from electricity, heat or gas meters equipped with a pulse output or RS485 serial interface. Data from Poreg2P can be transferred via different communication media to a central station for monitoring and billing energy consumption. The data logger is compatible with SCADA.

 

 

 

 

Copyrights © 2010 Wescon Inc. All rights reserved.

 

+ FOR UTILITY

> Power Automation Products

> Metering Products

+ FOR COMMERCIAL & INDUSTRIAL

 

Wescon Store
  • High storage capacity
  • Multiple communication ports
  • Support multiple protocols
  • Modularly design
  • Easy upgrade and expansion capabilities

 

 

 

 

 

 

 

  • Voltage: 3 X 100 to 3 X 230 VAC
  • Frequency: 45 to 65 Hz
  • External back-up supply: 20 to 120V DC, +- 15%
  • Internal back-up supply: Li-battery, 500 mAh
  • Number of relay pulse inputs: up to 64
  • Pulse rate: 10 imp/s
  • Number of meters connected via RS485: 8 per serial surface, totally 48 meters
  • SDT communication protocol (master): IEC870-5-1 to 5 (DIN 19244)
  • SDT communication protocol (slave): DIN 19244 slave
  • Number of pulse and / or control outputs: up to 32
  • Output relay ratings (semiconductor relay: 150mA, 400V ; Hg-relay: 180mA, 380V)
  • Data transmission rate (Optical port: 150 to 2400 Baud; RS232: 150 to 57600 Baud; RS-485: 150 to 57600 Baud)
  • Real - time clock: 32 kHz
  • RTC accurancy: +- 10 ppm
  • Central processor unit: MC68332 (32 bit)
  • Internal memory: 128kB EPROM + 32kB EEPROM + 256kB SRAM
  • Memory Card: JEIDA 4, PCMCIA 2.0 (Static RAM + Li battery: 64kB to 64MB; FLASH: 1MB to 16MB)
  • Keyboard (foil): 18 keys
  • Electromagnetic compatiblity: in compliance with EN 50082/2
  • RF protection: in compliance with EN 50082.2
  • Operating temperature range: 0 to 50 Celcius
  • Storage temperature range: -20 to 65 Celcius
  • Relative humidity: 90% without condense
  • Overall dimensions: 203 X 132.4 X 253 mm
  • Mass: 4kg